Civil aircraft inspection protocols are often used for parts removal but they can also be used to inspect the engine or other components of a plane for corrosion.
If they are not used as a tool, they can be an obstacle to civil aircraft parts removal.
Here are some examples of how to use them correctly:1.
Inspect the Engine: Inspect the engine in the engine bay, the tailpipe, and the oil pan.
If the oil has corroded, check the seal on the oil feed pipe.
If you are able to access the engine, take the engine apart.
Inspect all the metal parts of the engine.
Inspect any metal parts on the intake manifold.
Inspect engine cover plates, the cylinder head, and all the cooling equipment.
If corrosion is detected, clean and inspect the exhaust manifold.
Check the air intake.
Check and inspect any electrical and mechanical components of the airplane, including the main electrical system.
Check any electrical or mechanical components on the airframe.
Inspect airframe parts for corrosion and check the paint and rust.
Inspect and inspect all parts of a vehicle to see if they are corrosion free.
Check that there is a leak in the fuel lines.
If there is no leak, replace the fuel line.
Inspect every part of the oil system and check all connections.
If your oil has deteriorated, replace it.
Inspect your fuel pump.
If it has corrodes, replace your fuel line as well.
Inspect oil line seals and adjust them as needed.
Inspect fuel system oil lines for corrosion or check the seals to make sure they are free of corrosion.
Inspect a fuel pump for corrosion as well as check for corrosion on the fuel pump valve.
Inspect an oil system valve for corrosion to make certain that it is functioning properly.
Inspect everything in the air conditioning system.
If all the components are corrosion-free, check for a leak and replace it if needed.2.
Inspect Engine and Cooling Systems: Inspect your engine and cooling systems for corrosion, check that there are no leaks, and clean the parts to make them as clean as possible.
Inspect exhaust and exhaust pipe.
Inspect cylinder head for corrosion if it is corroded.
Inspect valves and adjust valves as needed to make your engine work as expected.
Inspect pump and fuel system valves and check for leaks.
Inspect throttle body.
Inspect coolant line and check that it does not leak.
Inspect valve contacts.
Inspect intake manifold for corrosion from any damage to the intake pipe or valve contact.
Inspect radiator and check if it leaks.
Check for cracks or damage to any piping, tubing, or seals.
Inspect fans for corrosion that could cause damage to them.
Inspect electrical system to make it work as you expect it to.
Inspect battery terminals for corrosion damage to prevent overheating.
Inspect spark plugs for any damage from water damage.
Inspect for any rust on the electrical connector or the circuit board.
Inspect alternator and check to make the electrical connection as you expected.
Check electrical wiring for any corrosion damage.
If any corrosion is found, replace or repair as necessary.3.
Inspect Oil: Inspect all oil connections, valves, and connections to make everything as clean and as reliable as possible for the engine and the cooling system.
Inspect to make all connections as clean, as clear, and as strong as possible to prevent corrosion.
Check oil pressure.
Check air conditioning and cooling system for any leaks or problems.
Inspect check valve contacts to make any corrosion detected.
Check engine oil for any cracks, if any, and replace if needed to ensure that there have not been any leaks.4.
Inspect Cooling System: Inspect engine coolant system for corrosion of any component, including spark plugs, and check any electrical connections for any signs of corrosion damage as well, including if they have corroded to the point that they cannot be easily replaced.
Inspect vacuum line for any leaking.
Inspect wiring for corrosion for any possible damage.
Check to make room for any air conditioner to operate properly.
Check all connections to check if they will work correctly.
Inspect fan speed control for any leakage or damage.
Install and test fan blades for any wear or damage that could indicate possible corrosion damage, and install new blades.
Inspect seals for any potential corrosion damage from moisture or salt or oil or other fluids in the lines.
Inspect cooling system coolant lines for any leak damage or possible corrosion.5.
Inspect Air Conditioning: Inspect fan blades and other air conditioners for any sign of damage or damage from heat, moisture, or other substances, and test for any water damage to check for any moisture damage.
Look for any visible signs of water damage on the fans or any moisture or oil damage on their blades.
Check fan blades if any of the fans have leaks or any signs or damage indicating possible damage or moisture damage, or if any fan blades have corrosion damage or other signs of damage.6.
Inspect All Other Components: Inspect and clean any components of your airplane for